These setting will give you your best chance at a successful print. “Use Skirt/Brim”, “Prime Pillar”, and “Ooze shield” are all enabled to ensure maximum reliability, but are not required advanced users can modify printing parameters according to their specific needs. Unique parameters for dual-color printing can be found in the “Additions” tab. Next, click 'Add Process”, then follow the same procedure within this new process in order to assign its settings to the printer's right extruder (T1) by selecting ”Dual Mode - Right Extruder (T1)”. Navigate to the 'Auto-Configure Extruders' section in the upper right-hand corner of your process settings, then select ”Dual Mode - Left Extruder (T0)” - this will assign all process settings to T0. Select the process you'd like to assign to the printer's left extruder (T0), then click 'Edit Process Settings” in the lower left-hand corner.

'CUPA', 'CUPB'), and then assign each process to a specific extruder (e.g. 'M3-ID TO', 'M3-ID T1') for each 3D model, assign each of these processes to the 3D models on your build plate (e.g. Next, you will create a new process (e.g. You can double-click on one of the models to access the “Change Position” tool, which allows you to to enter coordinate values for the model's position along all three axes. To do so, select one of the models, zoom in, and manually reposition it along X and Y as best you can. If the models do not align after clicking 'Align Model Origins', you can also align them manually. This will align the models for you based upon information stored in the STL file. Not all models will align automatically if working with two models that do not automatically align, simply highlight both models, then click Edit>Align Model Origins. The first step in preparing a dual-color print is to align the models on the build plate. While the video and article are designed for the M3 Independent Dual printer, the process is the same for the Ultra One. Each 3D model as its own separate process.īefore you begin, you must download the newest version of Simplif圓D and import the proper Simplif圓D profiles into your Simplif圓D workstation.Dual-color prints are comprised of two separate, aligned 3D models.When slicing a print for the MakerGear M3 Independent Dual and Ultra One printer, in Simplif圓D, there are a few things to keep in mind in order to ensure successful printing.

How to cut simplify 3d models